Mafi Tsada mafi ƙarancin China na keɓantaccen Babban Tsayayyen Hannun Sanda'idodin Sandblasted

Short Short:

Mun himmatu wajen samar da sabis na sayayya mai sauki, adana lokaci da kuma adana kudi domin adana masu araha don araha mafi arha. Kasar Sin ta sanya kwastomomi masu daidaiton kayayyaki masu alaƙa, Kamfanin kasuwancin mu ya nace kan kirkirar haɓaka kamfani mai ɗorewa, tare da sanya mu ci gaba. zama masu samar da inganci na gida. Mun himmatu wajen samar da sabis na sayayya mai sauki, ceton lokaci da kuma adana kudi ta hanyar amfani da masu sayen kayayyaki na China na dunkulewar duniya, Rubber Glo ...


  • Samfurin Origin: China
  • Item Babu .: DX-SC-01
  • Tashar jirgin ruwa: China
  • Gubar Lokaci: A 35-50 kwanaki
  • Biya: T / T, L / C
  • samfurin Detail

    Mun himmatu wajen samar da sabis na sayayya mai sauki, adana lokaci da kuma adana kudi domin adana masu araha don araha mafi arha. Kasar Sin ta sanya kwastomomi masu daidaiton kayayyaki masu alaƙa, Kamfanin kasuwancin mu ya nace kan kirkirar haɓaka kamfani mai ɗorewa, tare da sanya mu ci gaba. zama masu samar da inganci na gida.
    Mun himmatu wajen samar da sabis na sayayya mai sauki, ceton lokaci da kuma ceton kuɗaɗe na mai amfani ga foran Sandan Sama na Duniya ,Rubber Gloves , Duk waɗannan hanyoyin an samar da su a masana'antarmu da ke China. Don haka za mu iya ba da tabbacin ingancinmu da matukar muhimmanci kuma yana da kyau. A cikin waɗannan shekaru huɗu muna sayar da kayan masarufi ba kawai har ma da hidimarmu ga abokan cinikinmu a ko'ina cikin duniya.
    1) Machine jiki da aka yi da bakin 

    2) A amfani da sabon pneumatic canji don sarrafa aikawa famfo da kuma matsa iska, sauki, mai lafiya ne kuma abin dogara 

    3) Sand famfo zane ne m, sauki aiki, tsawon rai sabis 

    4) New zane, dace da kananan da kuma matsakaici-sized workpiece surface jiyya

    5) Bayar da shawarar yin amfani da karami gilashin beads da kuma duk wani nau'i na finer zinariya grit 

    Low amo & kudin, high dace, babu ƙura yayyo, sauki tabbatarwa, grit sake yin fa'ida.

    Aikace-aikace:

    1) ayukan iska mai ƙarfi kayan aiki domin tsabtace na workpiece surface  

    2) ayukan iska mai ƙarfi kayan aiki ga pre-jiyya na workpiece surface shafi

    3) Sandblasting kayan aiki iya canza jiki da kuma inji Properties na workpiece

    4) Light aiki na workpiece

     

    Bayani dalla-dalla:

    model 1212 w 9080 w 5858 w
    aiki Area 1200 * 1200 * 800  900 * 800 * 580 580 * 580 * 580
    Load-hali 60 kilogiram 60 kilogiram 40 kg

    Tushen wutan lantarki

     220v, 50Hz  220v, 50Hz  220v, 50Hz
    Girma 20 Kg ruwa, 5Kg abrasives  20 Kg ruwa, 5Kg abrasives  20 Kg ruwa, 5Kg abrasives 
    matsa iska wadata Matsa lamba 4-8kg / cm2, Flow: ≥0.7m3 / min

     

    Bayanan fasaha da softaware: 
    1 Girman fasali (mm) 1700 * 1300 * 2000
    2 Girma na aiki (mm) 1000 * 1000 * 750
    3 Girman Window (mm)  670 * 790
    4 Tushen wutan lantarki 220V 50Hz
    5 Tushen Sama 0.8Mpa

    ayukan iska mai ƙarfi kafin & bayan na sandblast hukuma

    Wannan yashi ayukan iska mai ƙarfi inji iya zama atomatik ko Semi-atomatik dangane abokin ciniki ta bukatun.

     

    Ayukan iska mai ƙarfi sassa:

    The mota, da hannun riga safar hannu, da shigar da yashi tube, da seep yashi net, yashi, da tebur, da kwandon, ka kuma iya saya duk da wannan sassa daga gare mu.

    ayukan iska mai ƙarfi sassa na sandblast hukuma

     

    Shiryawa & Bayarwa:
    1 Kunshin Ta akwatin katako
    (Injin ƙirar yashi yana da nauyi, fiye da 200kg, akwai yankuna da yawa, saboda haka muna ba da shawarar sakawa ta akwatin katako.)
    2 Lokacin isarwa Kwanaki 50 bayan karɓar biyan bashin
    4 Garantin inganci Shekara Daya
    5 Bayan-tallace-tallace da Aka Bayar  Injiniyoyin da suke da su zuwa kayan aikin sabis a ƙasashen waje

    kunshin na sandblast hukuma

    Siyan kaiwa:

    Idan kana sha'awar mu na'ura, don Allah mai kirki sanar da mu da wadannan abubuwa:

    1. Sunan ka workpiece? (Kamar: ƙarfe simintin sassa, Aluminum auto sassa da dai sauransu)

    2. Dalilin da ayukan iska mai ƙarfi? (Tsatsa kau ko sa surface zama m shirya domin zanen?)

    3. A size kewayon da workpiece? (Max size da kuma min size)

    4. The nauyi na workpiece? (Max nauyi da kuma min.weight)

    5. The tsaftacewa iya aiki da rana / wata?

    6. Duk wani sauran fasaha da ake bukata?


  • Previous:
  • Next:

  • Aika sakon ka:

    Rubuta saƙonka a nan kuma ka aika da shi a gare mu

    related Products

    Aika sakon ka:

    Rubuta saƙonka a nan kuma ka aika da shi a gare mu
    WhatsApp Online Chat!