Chochitika & Show

  • Post time: 08-12-2019

               Through the safety technical requirements of the type shot blasting machine, the anchor bolts are often inspected and must not be loose, detached or broken. Check the gear unit housing daily and the heat at the bearing must not exceed the allowable temperature rise. When the temperatur...Werengani zambiri »

  • Post time: 08-05-2019

               1. Hook type shot blasting machine has compact structure, small size, no pit, easy loading and unloading, and wide adaptability to transportation and installation.      2. The new type of blasting machine with large shot blasting and high throwing speed can significantly improve the cl...Werengani zambiri »

  • Post time: 08-02-2019

              The inner wall of the characteristic steel pipe of the inner wall of the steel pipe shot blasting machine is still somewhat difficult to be compared with the outer wall. There is no convenient cleaning of the outer wall, and the degree of cleaning does not have a good effect on the oute...Werengani zambiri »

  • Post time: 07-29-2019

    Shot blasting machine always has a leak. What is the specific reason? How to adjust the shot blasting of shot blasting equipment? In addition, there are other problems associated with shot peening equipment. We will give specific examples below and give specific answers so that everyone can thor...Werengani zambiri »

  • Post time: 07-23-2019

              The operation rules of the crawler type shot blasting machine are as follows: before the application of the shot blasting machine, it is necessary to do the necessary smooth work so that the equipment can perform the labor normally. Perform the necessary inspections on the various opera...Werengani zambiri »

  • Post time: 07-15-2019

    Airblast machines can take the form of a blast cabinet, the blast media is pneumatically accelerated by compressed air and projected by nozzles onto the component. For special applications a media-water mix can be used, this is called wet blasting. In both air and wet blasting the blast nozzles ...Werengani zambiri »

  • Post time: 07-10-2019

    Shot blasting machinery, which is a website product and keywords, so for us all, it is an object that needs to be familiar and understood, and below, based on this requirement, the learning work of the product is to explain the relevant knowledge. Let everyone have the learning object and learnin...Werengani zambiri »

  • Post time: 07-09-2019

    Improve  fatigue  strength        Shot peening is a process specially designed to increase the fatigue strength of components subjected to alternating stress.        A tensile residual stress is generated in a surface treatment process or a heat treatment process such as grinding, milling, and be...Werengani zambiri »

  • Post time: 07-08-2019

                        The consumption of 1 kg of stainless steel pill is equivalent to the consumption of 17 kg of corundum, which is equivalent to the consumption of 100 kg of glass beads, which is equivalent to the consumption of 3-4 kg of ordinary steel pill, equivalent to the consumption of 3 k...Werengani zambiri »

  • Post time: 07-05-2019

    Five small points of the angle of the shot blasting machine. I believe that everyone will encounter some small problems when using the shot blasting machine to clean up the operation. We will continue to give you some knowledge about the use of shot blasting machines. Today, Let me talk about a f...Werengani zambiri »

  • Post time: 07-03-2019

                      Shotblasting uses wheel blast equipment to propel abrasive media on surfaces being treated for final finishing. This equipment uses a specially designed and closely controlled wheel to generate centrifugal force and blast abrasives like steel shot and steel grit on products. The...Werengani zambiri »

  • Post time: 06-28-2019

               The cover is welded by high-quality steel plates, and the holes for fixing the shaft, the guard plate and the directional sleeve on the cover are processed at one time, so that the gap between the directional sleeve and the splitting wheel is uniform, which not only reduces The phenome...Werengani zambiri »

12345Next> >> Page 1 / 5
WhatsApp Online Chat!